Subclass of CIM_Service
This service allows the active management of a Storage Server. It allows jobs to be started for the creation, modification and deletion of storage objects (StoragePools, StorageVolumes and LogicalDisks).
None
uint32 ReturnToStoragePool (CIM_ConcreteJob Job, CIM_LogicalElement TheElement)
Start a job to delete an element previously created from a StoragePool. The freed space is returned to the source StoragePool. If 0 is returned, the function completed successfully and no ConcreteJob was required. If 4096/0x1000 is returned, a ConcreteJob will be started to delete the element. A reference to the Job is returned in the Job parameter.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_LogicalElement TheElement
- Reference to the element to return to the StoragePool.
uint32 CreateOrModifyElementFromElements (string ElementName, uint16 ElementType, CIM_ConcreteJob Job, CIM_ManagedElement Goal, uint64 Size, CIM_StorageExtent[] InElements, CIM_LogicalElement TheElement)
Start a job to create (or modify) a specified storage element from specified input StorageExtents. The created or modified storage element can be a StorageExtent, StorageVolume, LogicalDisk, or StoragePool. An input list of InElements must be specified. The GetAvailableExtents method can be used to get a list of valid extents that can be used to achieve a desired goal. Validity of the extents is determined by the implementation. As an input parameter, Size specifies the desired size of the element. As an output parameter, it specifies the size achieved. Space is taken from the input InElements. The desired Settings for the element are specified by the Goal parameter. If the size of Extents passed is less than the size requested, then the capacity is drawn from the extents in the order, left to right, that the Extents were specified. The partial consumption of an Extent is represented by an Extent for the capacity used and an Extent for the capacity not used. If the Size is NULL, then a configuration using all Extents passed will be attempted. If the requested size cannot be created, no action will be taken, and the Return Value will be 4097/0x1001. Also, the output value of Size is set to the nearest possible size. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to create the element. The Job’s reference will be returned in the output parameter Job.
ValueMap Values 0 Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097 Size Not Supported 4098..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN string ElementName
- A end user relevant name for the element being created. If NULL, then a system-supplied default name can be used. The value will be stored in the ‘ElementName’ property for the created element. If not NULL, this parameter will supply a new name when modifying an existing element.
- IN uint16 ElementType
Enumeration indicating the type of element being created or modified. If the input parameter TheElement is specified when the operation is a ‘modify’, this type value must match the type of that instance. The actual CIM class of the created TheElement can be vendor-specific, but it must be a derived class of the appropriate CIM class – i.e., CIM_StorageVolume, CIM_StorageExtent, CIM_LogicalDisk, or CIM_StoragePool.
ValueMap Values 0 Unknown 1 Reserved 2 Storage Volume 3 Storage Extent 4 Storage Pool 5 Logical Disk 6 ThinlyProvisionedStorageVolume 7 ThinlyProvisionedLogicalDisk DMTF Reserved 32768..65535 Vendor Specific - OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_ManagedElement Goal
- The requirements for the element to maintain. If set to a null value, the default configuration associated with the Service will be used. This parameter should be a reference to a Setting, SettingData, or Profile appropriate to the element being created. If not NULL, this parameter will supply a new Goal when modifying an existing element.
- IN, OUT uint64 Size
- As an input parameter Size specifies the desired size. If not NULL, this parameter will supply a new size when modifying an existing element. As an output parameter Size specifies the size achieved.
- IN CIM_StorageExtent[] InElements
- Array of references to storage element instances that are used to create or modify TheElement.
- IN, OUT CIM_LogicalElement TheElement
- As an input parameter: if null, creates a new element. If not null, then the method modifies the specified element. As an output parameter, it is a reference to the resulting element.
uint32 AttachOrModifyReplica (CIM_ConcreteJob Job, CIM_ManagedElement SourceElement, CIM_ManagedElement TargetElement, uint16 CopyType, string Goal, CIM_NetworkPipe ReplicationPipe)
Create (or start a job to create) a StorageSynchronized mirror relationship between two storage elements. The target element may be a local or a remote storage element. A remote mirror pair may be scoped by a peer-to-peer connection modeled as a NetworkPipe between peers.
If Job Completed with No Error (0) is returned, the function completed successfully and a ConcreteJob instance is not created.
If Method Parameters Checked - Job Started (0x1000) is returned, a ConcreteJob is started, a reference to which is returned in the Job output parameter.
A return value of Not Supported (1) indicates the method is not supported.
All other values indicate some type of error condition.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unspecified Error 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 0x1000 Method Parameters Checked - Job Started 0x1001..0x7FFF Method Reserved 0x8000..0xFFFF Vendor Specific Parameters
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if the task completed).
- IN CIM_ManagedElement SourceElement
- The source storage element which may be a StorageVolume, StorageExtent, LogicalFile, FileSystem, CommonDatabase, or any other storage object. For this reason, the type is made very generic.
- IN CIM_ManagedElement TargetElement
- Reference to the target storage element (i.e., the replica). The target storage element which may be a StorageVolume, StorageExtent, LogicalFile, FileSystem, CommonDatabase, or any other storage object. For this reason, the type is made very generic.
- IN uint16 CopyType
CopyType describes the type of Synchronized relationship that will be created. Values are: Async: Create and maintain an asynchronous copy of the source. Sync: Create and maintain a synchronized copy of the source. UnSyncAssoc: Create an unsynchronized copy and maintain an association to the source element.
UnSyncUnAssoc: Create an unassociated copy of the source element.
UnSyncAssoc and UnSyncUnAssoc are not supported for remote mirror replicas.
ValueMap Values 2 Async 3 Sync 4 UnSyncAssoc 5 UnSyncUnAssoc 6..4095 DMTF Reserved 0x1000..0xFFFF Vendor Specific - IN string Goal
- The StorageSetting properties to be created or modified for the target element.
- IN CIM_NetworkPipe ReplicationPipe
- The NetworkPipe element that scopes the remote mirror pair. If the value is null, remote mirrors do not require a pre-established connection.
uint32 CreateReplicationBuffer (CIM_ConcreteJob Job, CIM_ManagedElement Host, CIM_StorageExtent TargetElement, CIM_StoragePool TargetPool, CIM_Memory ReplicaBuffer)
Create (or start a job to create) a replication buffer that buffers asynchronous write operations for remote mirror pairs. The buffer is an instance of CIM_Memory with an AssociatedMemory association to a hosting system or to a replication network pipe. The buffer element may be created based on a StorageExtent, in a pool or in a manner opaque to a client. If 0 is returned, the function completed successfully and no ConcreteJob instance is created. If 0x1000 is returned, a ConcreteJob is started, a reference to which is returned in the Job output parameter. A return value of 1 indicates the method is not supported. All other values indicate some type of error condition.
If Job Completed with No Error (0) is returned, the function completed successfully and a ConcreteJob instance is not created.
If Method Parameters Checked - Job Started (0x1000) is returned, a ConcreteJob is started, a reference to which is returned in the Job output parameter.
A return value of Not Supported (1) indicates the method is not supported.
All other values indicate some type of error condition.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unspecified Error 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 0x1000 Method Parameters Checked - Job Started 0x1001..0x7FFF Method Reserved 0x8000..0xFFFF Vendor Specific Parameters
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if the task completed).
- IN CIM_ManagedElement Host
- The hosting system or replication pipe that will be antecedent to the created buffer.
- IN CIM_StorageExtent TargetElement
- Reference to a component extent for the buffer element.
- IN CIM_StoragePool TargetPool
- Reference to a container pool for the buffer element.
- OUT CIM_Memory ReplicaBuffer
- Reference to the created replica buffer element.
uint32 CreateReplica (string ElementName, CIM_ConcreteJob Job, CIM_LogicalElement SourceElement, CIM_LogicalElement TargetElement, CIM_StorageSetting TargetSettingGoal, CIM_StoragePool TargetPool, uint16 CopyType)
Start a job to create a new storage object which is a replica of the specified source storage object. (SourceElement). Note that using the input paramter, CopyType, this function can be used to instantiate the replica, and to create an ongoing association between the source and replica. If 0 is returned, the function completed successfully and no ConcreteJob instance is created. If 4096/0x1000 is returned, a ConcreteJob is started, a reference to which is returned in the Job output parameter.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN string ElementName
- A end user relevant name for the element being created. If NULL, then a system supplied default name can be used. The value will be stored in the ‘ElementName’ property for the created element.
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_LogicalElement SourceElement
- The source storage object which may be a StorageVolume or storage object.
- OUT CIM_LogicalElement TargetElement
- Reference to the created target storage element (i.e., the replica).
- IN CIM_StorageSetting TargetSettingGoal
- The definition for the StorageSetting to be maintained by the target storage object (the replica).
- IN CIM_StoragePool TargetPool
- The underlying storage for the target element (the replica) will be drawn from TargetPool if specified, otherwise the allocation is implementation specific.
- IN uint16 CopyType
CopyType describes the type of copy that will be made. Values are:
Async: Create and maintain an asynchronous copy of the source.
Sync: Create and maintain a synchronized copy of the source.
UnSyncAssoc: Create an unsynchronized copy and maintain an association to the source.
UnSyncUnAssoc: Create unassociated copy of the source element.
ValueMap Values 2 Async 3 Sync 4 UnSyncAssoc 5 UnSyncUnAssoc DMTF Reserved 32768..65535 Vendor Specific
uint32 GetElementsBasedOnUsage (uint16 ElementType, uint16 Usage, uint16 Criteria, CIM_StoragePool ThePool, CIM_ManagedSystemElement[] TheElements)
Allows retrieving elements that meet the specified Usage. The criteria can be “available only”, “in use only”, or both.
ValueMap Values 0 Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter DMTF Reserved 32768..65535 Vendor Specific Parameters
- IN uint16 ElementType
Enumeration indicating the type of elements to get.
ValueMap Values 0 Unknown 2 StorageVolume 3 StorageExtent 4 StoragePool 5 Logical Disk DMTF Reserved 32768..65535 Vendor Specific - IN uint16 Usage
- The specific Usage to be retrieved.
- IN uint16 Criteria
Specifies whether to retrieve all elements, available elements only, or the elements that are in use.
ValueMap Values 0 Unknown 2 All 3 Available Only 4 In Use Only DMTF Reserved 32768..65535 Vendor Specific - IN CIM_StoragePool ThePool
- Limit the search for the elements that satisfy the criteria to this StoragePool only. If null, all appropriate StoragePools will be considered.
- OUT CIM_ManagedSystemElement[] TheElements
- Array of references to storage element instances retrieved.
uint32 AssignStorageResourceAffinity (uint16 ResourceType, CIM_ConcreteJob Job, CIM_ComputerSystem StorageProcessor, CIM_LogicalElement[] StorageResources)
Start a job to assign affinity of a StoragePool(s) or StorageVolume(s) to a storage processor. At the conclusion of the operation, the resource will be a member of the StorageResourceLoadGroup with the primary affinity for the specified storage processor. Support for this method is indicated by the presence of an instance of StorageServerAsymmetryCapabilites in which the property StorageResourceAffinityAssignable is ‘true’. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a job will be started to assign the element. The Job’s reference will be returned in the output parameter Job.
ValueMap Values 0 Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097 Size Not Supported 4098..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN uint16 ResourceType
Enumeration indicating the type of resource being assigned or modified. .
ValueMap Values 2 StorageVolume 3 StoragePool - OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN, OUT CIM_ComputerSystem StorageProcessor
- Reference to the storage processor to which to assign the resource.
- IN CIM_LogicalElement[] StorageResources
- Array of references to storage resource instances to be assigned.
uint32 CreateOrModifyElementFromStoragePool (string ElementName, uint16 ElementType, CIM_ConcreteJob Job, CIM_ManagedElement Goal, uint64 Size, CIM_StoragePool InPool, CIM_LogicalElement TheElement)
Start a job to create (or modify) a specified element (for example a StorageVolume or StorageExtent) from a StoragePool. One of the parameters for this method is Size. As an input parameter, Size specifies the desired size of the element. As an output parameter, it specifies the size achieved. Space is taken from the input StoragePool. The desired settings for the element are specified by the Goal parameter. If the requested size cannot be created, no action will be taken, and the Return Value will be 4097/0x1001. Also, the output value of Size is set to the nearest possible size. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to create the element. The Job’s reference will be returned in the output parameter Job.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097 Size Not Supported 4098..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN string ElementName
- A end user relevant name for the element being created. If NULL, then a system supplied default name can be used. The value will be stored in the ‘ElementName’ property for the created element. If not NULL, this parameter will supply a new name when modifying an existing element.
- IN uint16 ElementType
Enumeration indicating the type of element being created or modified. If the input parameter TheElement is specified when the operation is a ‘modify’, this type value must match the type of that instance.
ValueMap Values 0 Unknown 1 Reserved 2 StorageVolume 3 StorageExtent 4 LogicalDisk 5 ThinlyProvisionedStorageVolume 6 ThinlyProvisionedLogicalDisk DMTF Reserved 32768..65535 Vendor Specific - OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_ManagedElement Goal
- The requirements for the element to maintain. If set to a null value, the default configuration from the source pool will be used. This parameter should be a reference to a Setting or Profile appropriate to the element being created. If not NULL, this parameter will supply a new Goal when modifying an existing element.
- IN, OUT uint64 Size
- As an input parameter Size specifies the desired size. If not NULL, this parameter will supply a new size when modifying an existing element. As an output parameter Size specifies the size achieved.
- IN CIM_StoragePool InPool
- The Pool from which to create the element. This parameter must be set to null if the input parameter TheElement is specified (in the case of a ‘modify’ operation).
- IN, OUT CIM_LogicalElement TheElement
- As an input parameter: if null, creates a new element. If not null, then the method modifies the specified element. As an output parameter, it is a reference to the resulting element.
uint32 CreateOrModifyStoragePool (string ElementName, CIM_ConcreteJob Job, CIM_StorageSetting Goal, uint64 Size, string[] InPools, string[] InExtents, CIM_StoragePool Pool)
Starts a job to create (or modify) a StoragePool. The StoragePool will be (or must be) scoped to the same System as this Service. One of the parameters for this method is Size. As an input parameter, Size specifies the desired size of the pool. As an output parameter, it specifies the size achieved. Space is taken from either or both of the specified input StoragePools and StorageExtents (InPools and InExtents). The capability requirements that the Pool must support are defined using the Goal parameter. If the requested pool size cannot be created, no action will be taken, the Return Value will be 4097/0x1001, and the output value of Size will be set to the nearest possible size. If 0 is returned, then the task completed successfully and the use of ConcreteJob was not required. If the task will take some time to complete, a ConcreteJob will be created and its reference returned in the output parameter Job.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097 Size Not Supported 4098..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN string ElementName
- A end user relevant name for the pool being created. If NULL, then a system supplied default name can be used. The value will be stored in the ‘ElementName’ property for the created pool. If not NULL, this parameter will supply a new name when modifying an existing pool.
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_StorageSetting Goal
- Reference to an instance of StorageSetting that defines the desired capabilities of the StoragePool. If set to a null value, the default configuration from the source pool will be used. If not NULL, this parameter will supply a new Goal setting when modifying an existing pool.
- IN, OUT uint64 Size
- As an input parameter this specifies the desired pool size in bytes. As an output parameter this specifies the size achieved.
- IN string[] InPools
- Array of strings containing representations of references to CIM_StoragePool instances, that are used to create the Pool or modify the source pools.
- IN string[] InExtents
- Array of strings containing representations of references to CIM_StorageExtent instances, that are used to create the Pool or modify the source extents.
- IN, OUT CIM_StoragePool Pool
- As an input parameter: if null, creates a new StoragePool. If not null, modifies the referenced Pool. When returned, it is a reference to the resulting StoragePool.
uint32 AttachReplica (CIM_ConcreteJob Job, CIM_ManagedElement SourceElement, CIM_ManagedElement TargetElement, uint16 CopyType)
Create (or start a job to create) a StorageSynchronized relationship between two existing storage objects. Note that using the input parameter, CopyType, this function can be used to to create an ongoing association between the source and replica. If 0 is returned, the function completed successfully and no ConcreteJob instance is created. If 0x1000 is returned, a ConcreteJob is started, a reference to which is returned in the Job output parameter. A return value of 1 indicates the method is not supported. All other values indicate some type of error condition.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unspecified Error 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 0x1000 Method Parameters Checked - Job Started 0x1001..0x7FFF Method Reserved 0x8000..0xFFFF Vendor Specific Parameters
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if the task completed).
- IN CIM_ManagedElement SourceElement
- The source storage object which may be a StorageVolume or other storage object.
- IN CIM_ManagedElement TargetElement
- Reference to the target storage element (i.e., the replica).
- IN uint16 CopyType
CopyType describes the type of Synchronized relationship that will be created. Values are:
Async: Create and maintain an asynchronous copy of the source.
Sync: Create and maintain a synchronized copy of the source.
UnSyncAssoc: Create an unsynchronized copy and maintain an association to the source.
UnSyncUnAssoc: Create unassociated copy of the source element.
ValueMap Values 2 Async 3 Sync 4 UnSyncAssoc 5 UnSyncUnAssoc DMTF Reserved 0x8000..0xFFFF Vendor Specific
uint32 CreateElementsFromStoragePool (string[] ElementNames, uint16 ElementType, uint64 ElementCount, CIM_ConcreteJob Job, CIM_ManagedElement Goal, uint64 Size, CIM_StoragePool InPool, CIM_LogicalElement[] TheElements)
Start a job to create (or modify) a specified elements (for example StorageVolumes or StorageExtents) from a StoragePool. One of the parameters for this method is Size. As an input parameter, Size specifies the desired size of the element. As an output parameter, it specifies the size achieved. Space is taken from the input StoragePool. The desired settings for the element are specified by the Goal parameter. If the requested size cannot be created, no action will be taken, and the Return Value will be 4097/0x1001. Also, the output value of Size is set to the nearest possible size. If 0 is returned, the function completed successfully and no ConcreteJob instance was required. If 4096/0x1000 is returned, a ConcreteJob will be started to create the element. The Job’s reference will be returned in the output parameter Job. If the number of elements created is less than the number of elements requested, the return value will be 4098/0x1002.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097 Size Not Supported 4098 Partially Completed Operation 4099..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN string[] ElementNames
- One or more user relevant names for the element being created. If NULL, then system supplied default names may be used. The value will be stored in the “ElementName” property for the created element.
- IN uint16 ElementType
Enumeration indicating the type of element being created.
ValueMap Values 0 Unknown 1 Reserved 2 StorageVolume 3 StorageExtent 4 LogicalDisk 5 ThinlyProvisionedStorageVolume 6 ThinlyProvisionedLogicalDisk DMTF Reserved 32768..65535 Vendor Specific - IN uint64 ElementCount
- Count of elements to create.
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_ManagedElement Goal
- The requirements for the element to maintain. If set to a null value, the default configuration from the source pool will be used. This parameter should be a reference to a Setting or Profile appropriate to the element being created.
- IN, OUT uint64 Size
- As an input parameter Size specifies the desired size for each element created. As an output parameter Size specifies the size achieved.
- IN CIM_StoragePool InPool
- The Pool from which to create the elements. If not supplied, system locates an appropriate pool.
- OUT CIM_LogicalElement[] TheElements
- Reference to the resulting elements.
uint32 DeleteStoragePool (CIM_ConcreteJob Job, CIM_StoragePool Pool)
Start a job to delete a StoragePool. The freed space is returned source StoragePools (indicated by AllocatedFrom StoragePool) or back to underlying storage extents. If 0 is returned, the function completed successfully, and no ConcreteJob was required. If 4096/0x1000 is returned, a ConcreteJob will be started to delete the StoragePool. A reference to the Job is returned in the Job parameter.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_StoragePool Pool
- Reference to the pool to delete.
uint32 CreateOrModifyReplicationPipe (string PipeElementName, CIM_ComputerSystem SourceSystem, CIM_ComputerSystem TargetSystem, CIM_ProtocolEndpoint[] SourceEndpoint, CIM_ProtocolEndpoint[] TargetEndpoint, string Goal, CIM_NetworkPipe ReplicationPipe)
This method establishes a peer-to-peer connection identified by a NetworkPipe element and two ProtocolEndpoint elements created by the method provider. The NetworkPipe is associated to a special peer-to-peer Network element. The provider will verify that two systems are capable of a peer relationship. If endpoints are assigned to the pipe, the same number of source and target endpoints must be supplied by the client to form a set of endpoint pairs. If ReplicationPipe is not supplied as an input parameter, a new pipe is created. If a pipe is supplied, a new set of endpoints is assigned to the existing pipe.
If Success (0) is returned, the function completed successfully.
A return value of Not Supported (1) indicates the method is not supported.
A return value of Busy (0x1000) indicates the method is not supported.
All other values indicate some type of error condition.
ValueMap Values 0 Success 1 Not Supported 2 Unspecified Error 3 Timeout 4 Failed 5 Invalid Parameter DMTF Reserved 0x1000 Busy 0x1001..0x7FFF Method Reserved 0x8000..0xFFFF Vendor Specific Parameters
- IN string PipeElementName
- A user-friendly name for the element created.
- IN CIM_ComputerSystem SourceSystem
- One of the two peer systems participating in the established peer-to-peer connection. If the provider supports uni-directional connections, this must identify the system hosting replica source elements.
- IN CIM_ComputerSystem TargetSystem
- One of the two peer systems participating in the established peer-to-peer connection. If the provider supports uni-directional connections, this must identify the system hosting replica target elements.
- IN CIM_ProtocolEndpoint[] SourceEndpoint
- References to source system endpoints/ports assigned to the pipe. If a new pipe is created, this is the initial set of endpoints assigned. If an existing pipe is modified, this set replaces the previous set. The list must be null if a provider does not allow the client to manage port assignment.
- IN CIM_ProtocolEndpoint[] TargetEndpoint
- References to target system endpoints/ports assigned to the pipe. If a new pipe is created, this is the initial set of endpoints assigned. If an existing pipe is modified, this set replaces the previous set. The list must be null if a provider does not allow the client to manage port assignment.
- IN string Goal
- The setting properties to be maintained for the peer-to-peer connection.
- IN, OUT CIM_NetworkPipe ReplicationPipe
- Reference to the created or modified NetworkPipe.
uint32 ReturnElementsToStoragePool (uint16 Options, CIM_ConcreteJob Job, CIM_LogicalElement[] TheElements)
Start a job to delete elements previously created from StoragePools. The freed space is returned to the source StoragePool. If 0 is returned, the function completed successfully and no ConcreteJob was required. If 4096/0x1000 is returned, a ConcreteJob will be started to delete the element. A reference to the Job is returned in the Job parameter.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 4096 Method Parameters Checked - Job Started 4097..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN uint16 Options
Additional options.
Continue on nonexistent element: if the method encounters a non-existent element in the list of elements supplied, the method continues to delete the remaining elements. Return error on nonexistent element: if the method encounters a non-existent element in the list of elements supplied, the method returns an error.
ValueMap Values 2 Continue on nonexistent element 3 Return error on nonexistent element DMTF Reserved 32768..65535 Vendor Specific - OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_LogicalElement[] TheElements
- References to the elements to return to the StoragePool.
uint32 ModifySynchronization (uint16 Operation, CIM_ConcreteJob Job, CIM_StorageSynchronized Synchronization)
Modify (or start a job to modify) the synchronization association between two storage objects. If 0 is returned, the function completed successfully and no ConcreteJob instance was created. If 0x1000 is returned, a ConcreteJob was started and a reference to this Job is returned in the Job output parameter. A return value of 1 indicates the method is not supported. All other values indicate some type of error condition.
ValueMap Values 0 Job Completed with No Error 1 Not Supported 2 Unspecified Error 3 Timeout 4 Failed 5 Invalid Parameter 6 In Use DMTF Reserved 0x1000 Method Parameters Checked - Job Started 0x1001..0x7FFF Method Reserved 0x8000..0xFFFF Vendor Specific Parameters
- IN uint16 Operation
Operation describes the type of modification to be made to the replica. Values are:
Detach: ‘Forget’ the synchronization between two storage objects. Start to treat the objects as independent.
Fracture: Suspend the synchronization between two storage objects using Sync or Async replication.
The association and (typically) changes are remembered to allow a fast resynchronization. This may be used during a backup cycle to allow one of the objects to be copied while the other remains in production.
Resync Replica: Re-establish the synchronization of a Sync or Async replication. This will negate the action of a previous Fracture operation. Recreate a Point In Time image for an UnSyncAssoc replication.
Restore from Replica: Renew the contents of the original storage object from a replica.
Prepare: Get the link ready for a Resync operation to take place. Some implementations will require this operation to be invoked to keep the Resync operation as fast as possible. May start the copy engine.
Unprepare: Clear a prepared state if a Prepare is not to be followed by a Resync operation.
Quiesce: Some applications require notification so that they can ready the link for an operation. For example flush any cached data or buffered changes. The copy engine is stopped for UnSyncAssoc replications.
Unquiesce: Take the link from the quiesced state (without executing the intended operation.
Start Copy: initiate a full background copy of the source to the UnSyncAssoc replica. Replica enters Frozen state when copy operation is completed.
Stop Copy: stop the background copy previously started. Reset To Sync: Change the CopyType of the association to Sync (e.g., from the Async CopyType).
Reset To Async: Change the CopyType of the association to Async (e.g., from the Sync CopyType).
ValueMap Values 0 DMTF Reserved 1 DMTF Reserved 2 Detach 3 Fracture 4 Resync Replica 5 Restore from Replica 6 Prepare 7 Unprepare 8 Quiesce 9 Unquiesce 10 Reset To Sync 11 Reset To Async 12 Start Copy 13 Stop Copy DMTF Reserved 0x8000..0xFFFF Vendor Specific - OUT CIM_ConcreteJob Job
- Reference to the job (may be null if the task completed).
- IN CIM_StorageSynchronized Synchronization
- The referenced to the StorageSynchronized association describing the storage source/replica relationship.
uint32 ScsiScan (CIM_ConcreteJob Job, uint16 ConnectionType, string OtherConnectionType, CIM_SCSIProtocolEndpoint[] Initiators, string[] Targets, string[] LogicalUnits)
This method requests that the system rescan SCSI devices for changes in their configuration. If called on a general-purpose host, the changes are reflected in the list of devices available to applications (for example, the UNIX ‘device tree’. This method may also be used on a storage appliance to force rescanning of attached SCSI devices.
This operation can be disruptive; optional parameters allow the caller to limit the scan to a single or set of SCSI device elements. All parameters are optional; if parameters other Job are passed in as null, a full scan is invoked.
ValueMap Values 0 Success 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6..4095 DMTF Reserved 4096 Invalid connection type 4097 Invalid Initiator 4098 No matching target found 4099 No matching LUs found 4100 Prohibited by name binding configuration DMTF Reserved 32768..65535 Vendor Specific Parameters
- IN, OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN uint16 ConnectionType
The type of connection, constrains the scan to initiator ports of this type. Only used if the Initiators parameter is null.
ValueMap Values 1 Other 2 Fibre Channel 3 Parallel SCSI 4 SSA 5 IEEE 1394 6 RDMA 7 iSCSI 8 SAS 9 ADT - IN string OtherConnectionType
- The connection type, if the ConnectionType parameter is “Other”.
- IN CIM_SCSIProtocolEndpoint[] Initiators
- A list of references to initiators. Scanning will be limited to SCSI targets attached to these initiators. If this parameter is null and connection is specified, all initiators of that connection type are scanned. If this parameter and ConnectionType are null, all targets on all system initiators are probed.
- IN string[] Targets
- A list of names or numbers for targets. These should be formatted to match the appropriate connection type, For example, PortWWNs would be specified for Fibre Channel targets.
- IN string[] LogicalUnits
- A list of SCSI logical unit numbers representing logical units hosted on the targets specified in the Targets argument.
uint32 RequestUsageChange (uint16 Operation, uint16 UsageValue, string OtherUsageDescription, CIM_ConcreteJob Job, CIM_LogicalElement TheElement)
Allows a client to request the Usage to be set if the client has access to the element supplied and the request is valid.
ValueMap Values 0 Completed with No Error 1 Not Supported 2 Unknown 3 Timeout 4 Failed 5 Invalid Parameter 6 Not Authorized DMTF Reserved 4096 Method Parameters Checked - Job Started 4097..32767 Method Reserved 32768..65535 Vendor Specific Parameters
- IN uint16 Operation
The action to perform.
ValueMap Values 2 Set 3 Modify “Other” description only DMTF Reserved 32768..65535 Vendor Specific - IN uint16 UsageValue
- Applicable requested usage/restriction – see the appropriate Usage ValueMap.
- IN string OtherUsageDescription
- New description text. Applicable when the usage value includes “Other”.
- OUT CIM_ConcreteJob Job
- Reference to the job (may be null if job completed).
- IN CIM_LogicalElement TheElement
- The storage element to modify.